Spotman C said:
Well, my incredible wife never ceases to amaze me. She was not one of us when I met her but she gets more and more into it with every passing year. Last night, after a session where I tickled her to her limits in TWO different positions, we were just laying there in what she calls the afterglow hug, catching our breath and she comes out with "You know, we have just GOT to get you a set of stocks." I was stunned, I never thought I'd hear that in my life.But now I dont want to waste any time.LOL
I guess I could try to build a set from scratch unless someone knows of a place where I can order a set. Has anyone built a set that can give me any advice?I am a man on a mission now and I'll take any help I can get.I want a smallish set that I can put away between uses but how would I design to keep a smaller set like that immobile?
Thanks in advance to all my tickling Brethren (and sisteren)
Spotman C
Spotman, you are one LUCKY schmoe! LOL I built my own set of stocks, but have yet to find a willing victim.
This is the list of equipment you'll need for a compact set of stocks.
2 48 inch lengths of 2X6,
4 24 inch lengths of 2X4,
2 24 inch lengths of 4X4,
2 6 inch bolts with screw on nuts on the end,
A box of 5 inch screws,
3 large-ish screw in metal eyelets.
Lots of patience! LOL (And plasters for blisters!)
I used pine for my timber and bought it dressed. Pine isn't very good for outdoor use, but I drowned my timber in Cuprinol wood preserver, to make it dark so it looks like teak or oak.
The 2X6's form the main body of the stocks and lay on top of each other. The 4 2X4's act as the uprights and two are placed at either end of the main body, sandwiching it. The 4X4's act as stabilisers on the ground. You have to screw them into the sides of the stocks, so they are paralell to the main body.
You need to cut the holes for wrists and ankles in the two 6X2's so that a half moon shape is in each one. (I have four holes in my stocks,two for ankles and two for wrists, so I have four half moon shapes in each 6X2.)
Screw the uprights in place at either end and then screw the 4X4's in place at the bottom.
Drill two holes in the top of the body one at either end. The holes should go through both front uprights, the top 2X6 and then both back uprights. When you slide the 6 inch bolts through these holes and then screw the nuts on the end, it locks the top 6X2 in place and the victim can't move it, or get out.
Screw one metal eyelet in place between the two centre holes,(which should be only about an inch apart) and one eyelet above the two outer holes. You use these eyelets to run ties through so you can secure her big toes and stop her feet from wiggling. It is agonising when you're being tickled and can't move an inch or even cover one foot with the other! LOL
If you want a picture that demonstrates this, then just look at some of Kujman's renfaire JPEG's that litter the net and you'll get the idea.
Let me know if you need any more help.
P.S You might want to pad the holes with something to prevent chafing.
