nessonite1
3rd Level White Feather
- Joined
- Sep 20, 2003
- Messages
- 9,517
- Points
- 0
-
If you would like to get your account Verified, read this thread -
The TMF is sponsored by Clips4sale - By supporting them, you're supporting us. -
>>> If you cannot get into your account email me at [email protected] <<<
Don't forget to include your username
tickled in stocks
- Thread starter tickled2death1
- Start date
Sockstickler
1st Level Black Feather
- Joined
- Nov 28, 2005
- Messages
- 8,101
- Points
- 38
Hey, that's a really good idea 😀 Hope the table's pretty sturdy once the tickling starts though.
nessonite1
3rd Level White Feather
- Joined
- Sep 20, 2003
- Messages
- 9,517
- Points
- 0
Sturdy?
Yes, it is actually, though it doesn't look it from the pic. The trick is that the 'ler sits on the shelf. I haven't tried it with a lightweight 'ler or a stronger 'lee so...testing has to be done before I call it a true success.
Yes, it is actually, though it doesn't look it from the pic. The trick is that the 'ler sits on the shelf. I haven't tried it with a lightweight 'ler or a stronger 'lee so...testing has to be done before I call it a true success.
ticklehound
3rd Level Red Feather
- Joined
- Apr 19, 2001
- Messages
- 1,535
- Points
- 38
God, a fantasy of mine, this is . . . !!!!
Hmm, anybody know where mights I find a decent set of stocks for a fairly reasonable price? A simple table set would suffice. I think it would make a nice topic of convo in my apt. which could lead to . . . you know 😉
Hmm, anybody know where mights I find a decent set of stocks for a fairly reasonable price? A simple table set would suffice. I think it would make a nice topic of convo in my apt. which could lead to . . . you know 😉
Sockstickler
1st Level Black Feather
- Joined
- Nov 28, 2005
- Messages
- 8,101
- Points
- 38
Testing, eh? Well, if you're ever in the Washington State area, I could be persuaded to volunteer to help, though I doubt I'm what could be considered a lightweight 'ler (Though I hope to get back down to cruiserweight level). I'm fairly strong though 😎nessonite said:
I have pictures of my homemade stocks on the threads:Tickling with Long Hair and Fiendish New Tickle Torture Devices that worked pretty good for me.(I'm having trouble reposting them)
Stocks are the best bondage devices for slow,calculated tickling in my opinion.
Stocks are the best bondage devices for slow,calculated tickling in my opinion.
franceca rose1
TMF Expert
- Joined
- Feb 2, 2005
- Messages
- 323
- Points
- 0
crydun said:
wow your so lucky!!i've always wanted to get tickled in stocks,but never had the chance
BigNorm
3rd Level Violet Feather
- Joined
- Oct 6, 2002
- Messages
- 7,688
- Points
- 0
Camel26 said:
i was thinking about designing and building my own stocks. if i get any good at it, and if i have the free time, and if i don't get too many hard to answer questions on what i'm building from my friends and family, i might make some..
make myself a pair, and then make camel a pair, i figure if they're too big, i can ship them piece by piece and make them an easy assembly... but that's iff everything above comes too pass.
that would make a great and fun little business for the whole tickling community.
piercearrow33
TMF Expert
- Joined
- Nov 20, 2004
- Messages
- 306
- Points
- 0
Norm
I suggest making them adjustable for the tall folks and the short folks.
After you build them, ya gotta test it. I would suggest crydun, ness, camel, LK, etc.
I also suggest an ice chest attachment for your favorite beverage, while you are testing of course.
I suggest making them adjustable for the tall folks and the short folks.
After you build them, ya gotta test it. I would suggest crydun, ness, camel, LK, etc.
I also suggest an ice chest attachment for your favorite beverage, while you are testing of course.
BigNorm
3rd Level Violet Feather
- Joined
- Oct 6, 2002
- Messages
- 7,688
- Points
- 0
piercearrow33 said:
sharp guy, pierce, i see where you get the "arrow" in your name. but i had an idea for a different kind of stocks, something smaller, but even if i build them or not, i'll build schematics for the perfect stocks and post them in the forum... high school CAD class is finally coming in handy...
was thinking stocks that:
A. could be morphed into normal pieces of furniture (an ingenious idea for hiding your naughty toys, funny thinking a friend or family member might be sitting in a chair, which parts where used to restrain and tickle torture your partner the night before.... sounds dirty)
B. Disasembles in to a meaningless pile of woden planks.
C. Just a normal pair of stocks that can be decorated in a fashion that they looks like an artistic piece of wood, than a device of restraint and torture.
Sockstickler
1st Level Black Feather
- Joined
- Nov 28, 2005
- Messages
- 8,101
- Points
- 38
I like the idea of A, though it may be tricky to do. It sounds kind of like the futon of stocks, and I'd love a set like that. I'm not sure about B. It sounds like it'd be a hassle to put it together and take it apart, depending on how you do it. C sounds cool too though, and fairly easy to conceal, as long as you don't leave the padding in there.Bignorm868 said:
"Really, it's just a wine cabinet! I swear!"
knismo1
TMF Novice
- Joined
- Jul 21, 2003
- Messages
- 68
- Points
- 0
Well, as someone who's built a set of stocks, I can tell you that really it's a lot easier than you think -- you just have to decide if they're going to be standalone or if you plan on hitching them to something. If you're going to tie them or hook them to some sort of bed or table, then it's a lot easier than if they have to stand on their own.
I went to the local Home Depot a couple of summers ago, and bought a ten-foot length of 2x6, and had them cut it in half (I did the final measurement and cutting later, as I had to fit it to the footboard of my bed, which has posts that stick up about fourteen inches above the bed). I also picked up a about four mini-cleats and a box of eye-loop hooks.
At home, I measured ankle holes with a protractor (I can't remember the size I picked) and did two half circles on each one corresponding with the half circles that would be on the opposite stock. Couple minutes with a jigsaw and I had some holes. If I knew then what I know now, I would've taken a mini-sander and rounded off the edges of the wood inside the ankle-holes -- I want my victims to be in discomfort, but only from the sensations on the bottoms of their feet, not their ankles.
Upholstering the holes was the biggest pain, and the end product was the part I am least happy with. I found a store that sells foam and pillow padding, bought some of each; went to a fabric store and bought a few yards of black velvety-type fabric and some upholstery nails, and then when I got home I cut the foam so it fit inside the holes and then put small pieces of the fabric over them and used the upholstery nails to tack them into place. Later on, I had to take a staple gun and tack the fabric down tighter in places, as the nails were getting pulled out from all the "activity," so to speak.
The last was attaching the cleats and the eye-loops for the string/twine/cording, and drilling a few holes on the ends for rope to go through to hitch the stocks to the bed. Oh -- and there are two latches on the side of the stocks facing the victim -- the kind where the latch flips over and then the hasp twists to lock the latch shut. 🙂 This keeps the ankle holes properly lined up and makes sure the victim knows they're not going anywhere for a while.
The rest of the fabric I use to wrap the stocks in when it's stored or when I take it someplace. For instance, I was invited by a former victim to her BDSM club in Washington, DC and I took it down with me. Let's just say I had quite the audience once I hooked it to a bondage sling and convinced my first victim to get in. 😀
Here's a couple of pics that I hope give you an idea....
knismo
I went to the local Home Depot a couple of summers ago, and bought a ten-foot length of 2x6, and had them cut it in half (I did the final measurement and cutting later, as I had to fit it to the footboard of my bed, which has posts that stick up about fourteen inches above the bed). I also picked up a about four mini-cleats and a box of eye-loop hooks.
At home, I measured ankle holes with a protractor (I can't remember the size I picked) and did two half circles on each one corresponding with the half circles that would be on the opposite stock. Couple minutes with a jigsaw and I had some holes. If I knew then what I know now, I would've taken a mini-sander and rounded off the edges of the wood inside the ankle-holes -- I want my victims to be in discomfort, but only from the sensations on the bottoms of their feet, not their ankles.
Upholstering the holes was the biggest pain, and the end product was the part I am least happy with. I found a store that sells foam and pillow padding, bought some of each; went to a fabric store and bought a few yards of black velvety-type fabric and some upholstery nails, and then when I got home I cut the foam so it fit inside the holes and then put small pieces of the fabric over them and used the upholstery nails to tack them into place. Later on, I had to take a staple gun and tack the fabric down tighter in places, as the nails were getting pulled out from all the "activity," so to speak.
The last was attaching the cleats and the eye-loops for the string/twine/cording, and drilling a few holes on the ends for rope to go through to hitch the stocks to the bed. Oh -- and there are two latches on the side of the stocks facing the victim -- the kind where the latch flips over and then the hasp twists to lock the latch shut. 🙂 This keeps the ankle holes properly lined up and makes sure the victim knows they're not going anywhere for a while.
The rest of the fabric I use to wrap the stocks in when it's stored or when I take it someplace. For instance, I was invited by a former victim to her BDSM club in Washington, DC and I took it down with me. Let's just say I had quite the audience once I hooked it to a bondage sling and convinced my first victim to get in. 😀
Here's a couple of pics that I hope give you an idea....
knismo
