Tying the toes back (how to do this without stocks?)

[Raystanz333]

I'm done

 

[-Hari-]

I normally do a basic bit of ropework to hold the ankles together and then tie the toes back to that, holds well. just important to find the perfect point between comfortable and restrictive, you can go too far in each direction easily 🙂

 

[-Hari-]

another idea ive had, you know those things they use to separate toes for painting nails?

apply them so the openings are facing up and find a way to secure each end of it to some(probably quite thin) rope and pull back and tie behind the ankles, should be comfortable even at a decent stretch.

 

[TickleMyFancy]

I think your second idea is the best. That way, the soles are totally exposed and they can't get away at all 🙂

 

[P[a]pi]

I think idea #2 would work better than the first.

I like to do a hogtie and then tie the big toes back to the ankles. You would want your tie around the ankles to be pretty thick, and I use two shoe laces for the toe tie. A shorter one to tie the big toes together (using the whole shoe lace), and a longer one to cinch it between the toes and tie them back to the ankles.

This thread has a pic set of it. Check out set 17. http://www.ticklingforum.com/showth...pics-(that-I-made)-mf-f&p=3227616#post3227616

 

[Mike3355]

idea 2, they are face down and can't see the tickles coming.

 

[Skulls]

Here's a couple pics of a device I made:

 

[xX Yuna Xx]

This thread is a Lee's nightmare lol 😛
But.. If I was forced to choose.. It would be Idea #2

 

[TickleMyFancy]

Here's a couple pics of a device I made:

Jesus!

I'm so jealous :O

 

[SamuelKhan]

diabolical

 

[BMoreTklr]

Here's a couple pics of a device I made:

WHOA!!! Very innovative and looks like it'd be quite effective

 

[3xPIN]

I would say like idea one, except use an ankle bracelet and some yarn or cord. Thick rubber bands may work as well.

 

[Skulls]

Jeezus Christ! That's awesome! LOL

But is it comfortable?

I'm kinda curious what parts you used as well. I can recognize some of those but not all of them.

It is surprisingly very comfortable and very effective. I didn't expect it to be when I built it. I used pipe clamps for each of the toes. Key chain rings attached to those. Then a hook/eye bolt contraption. Turn the center piece one way, it tightens and the other, loosens. Finally some locking steel oval rings which I attached to the cuffs for added security. Tickle play makes one a bit mobile and the rings that came with the cuffs didn't make the cut.

 

[Skulls]

Jesus!

I'm so jealous :O

Why'd you have to live on the opposite side of the country then!?

 

[3xPIN]

Why'd you have to live on the opposite side of the country then!?

Whackity shmakity dooo!

Seriously though, how much money/time went into your contraption? and is it just the one or a pair?

 

[Skulls]

Whackity shmakity dooo!

Seriously though, how much money/time went into your contraption? and is it just the one or a pair?

It's a part of a pair. Money.....Maybe $25 about. (I already owned the cuffs) Time...A lot because I made a few trips to a couple different hardware stores. Takes time putting it on (tightening each toe ring)

Nice...I just might try to create this thing today. I'm heading to the hardware store but would love to know if there's any technical term for the "hook/eye bolt contraption" thingy.
The "locking steel oval rings"...are you able to get those at Home Depot as well?
Why didn't the rings that came with the cuff work? Were they too small or something?

I don't know if the hook/eye bolt has a special name or not. I found the Pipe Clamps at Lowes I think. I think I looked and Home Depot didn't have them. As for the rings that came with the cuffs....they weren't sealed. It was a D-ring with a small opening which when thrashing was applied, it opened up until it finally would slide off the leather. I replaced it with the locking oval ring.

 

[3xPIN]

Yes I found that the screws were called "straining screws".

I just used this device on Saturday and it was fantastic! I made some alterations to it that probably actually hindered it a little but it was amazing for it's first time. I now know a few kinks to sort out for the situation I used it in.
The lady friend of mine I used it on was very impressed 😉. Oh and I DID give you kudos for showing me the design lol.

but what I did was tie some nooses to the eyes of the screws that I wrapped around the toes. This allowed me to put the device on much faster than clamps would and made it more adjustable.
The only problem I ran into was the hooks staying in place wherever I hooped them. I think I got screws that were too large cause I had them tightened as tight as I could make them and the nooses were as short as possible.
But they only hooked off when struggling got all kinds of crazy so they did they're job very very well for the most part. I just had to re-hook them every now and then.

Thanks again for this awesome idea. 😀

....could we get some picks? On the alterations maybe?

 

[HeadRed]

god, all that metal...you should name it the terminator. lol

In any case, I'm still confused. Was the consensus that tying the toes back to rope was a worse idea than tying toes back to straps? also, maybe a few lee's could shoot me an opinion on what fabric was the most comfortable on toes? last thing I want to do it cause a friction burn/rash or excessive cut off to circulation to toes.

 

[3xPIN]

Maybe...but they wont' be on anybody's footsies. 😉

Fair enough!

 

[Sharkiegirl]

Here's a couple pics of a device I made:

😵 Ohmaigawd.............

 

[love feet]

wow